Replacement Double Glazing Window Handles
It is essential to replace a broken double-glazed window handle to ensure safety and efficiency.
uPVC handles are operated by a spinning wheel that runs through the middle of the handle into the lock mechanism within the window frame.
The height of the step on a uPVC handle can be identified by examining the screw cover caps on the inside of the handle.
Tilt & Turn
Tilt and turn windows are a common option in Europe but they have only recently made an impact here in the UK. These windows are a preferred choice for renovations and new constructions due to their sophisticated functionality. They are easy to open and close, allowing the air to flow and light into your home.
The locking points on the sash and the rubber seal that wraps across the entire frame's perimeter ensure that they are more airtight than other types of windows. Contrary to uPVC casement windows, tilt and turn windows can be opened from both sides and allow you to clean the outside of the windows without having to leave your home.
It is important to take into consideration the step height when replacing a tilt and turn window handle. This is the distance from the base of the handle to where it is attached to the window frame. This is important as the window won't be able to open properly in the event that you don't do it right.
Standard step heights for UPVC and aluminium tilt-and-turn windows are 21mm. Make sure the handle you choose comes with this same step height so that it will fit your existing window.
When you are choosing the replacement tilt and turn window handle, you should also consider the kind of operation. Some handles come with an lever that is locked down, up at 90 degrees to tilt and straight upwards to open. This is referred to as a "tilt-before-turn" (TBT), safe handle, and you should utilize it whenever children are present in your home.
A spindle is typically located on the handle of many tilt and turn windows. The spindle is adjusted in various places, much like the door lock. The length of the spindle varies as well. Some have a larger spindle that can be adjusted using a screwdriver. Others have a shorter spindle which may only be adjusted by loosening one screw at the base of the handle.
Casement
The casement window is one of the most popular type of double-glazed window due to a variety of reasons. It is simple to install and offers great energy efficiency and noise reduction. There are a few common issues with these windows. Homeowners should be aware. For instance, if the casement window handle breaks, it can be difficult to open the window.
There are a few basic steps you can take to replace the window handle. Follow these steps whether your casement window was put in place recently or is a few years old.
It is crucial to fix your uPVC window as soon as you can. This will protect your home and discourage burglars. You can choose from a wide range of window handles, including Espag handles and cockspur handle. It is essential to choose a handle that fits your window. If you have difficulty opening your windows, it could be due to the spindle inside the handle has worn out.
When it comes to replacing your uPVC casement window handles there are a few things to keep in mind. This includes the size of the handle as well as the screw centres and the spindle's size. Also, you should consider the lock's design and colour. This is because the mechanism for locking your window will be dependent on the kind of handle you have.
Espag handles are used on uPVC window frames today. These handles control the espagnolette multipoint locks on your uPVC windows. These handles are available in various colors and lock or unlocking versions. They are available in left and right opening styles.
Cockspur handles are still found on older uPVC windows, but they are not used anymore in the new double-glazed windows. The aluminium counterpart has a lower step height. They are typically 21mm, whereas the aluminium version is 9mm.
Another option for replacement double glazed window handles is to use blade or spade handles. These handles are similar to cockspur handles however they have a smaller spindle. These handles are commonly found on older wooden frames double glazed windows. They can also be seen on a few uPVC Cottage windows.
Sash
If you have an old sash window, you may need to replace the handles. This is because windows of this type typically come with an assembly that includes the counterweight, sash cord, pulley, and rails which allow the sash to move up and down with ease. The movement of the sash assists in preventing moisture from getting inside the frame and causing mould or wood rot and allows the window to open to let in fresh air.
You'll need to measure the spindle of your sash windows in order to determine the correct handle. It is determined by measuring the distance between the base of the handle and the frame. You'll also need to consider whether the window is handed, i.e. whether the handle opens anti-clockwise (right-handed) or clockwise (left-handed).
After you have chosen the best sash handles to fit your window, it's now time to determine if you require a tilt latch. A tilt latch is used to hold the window upright and can be installed on double or single-glazed windows. They are available in three varieties of tilt latches: internal tilt latches tilt latches that slide into the window, and tilt latches with a surface mount.
You can also add a sashlock on your sash windows to improve security. This will secure the opening of your window and stop it from being forced open by burglars.
There are many different designs of sash handles to choose from and Espag handles being the most popular for uPVC windows. These are typically slim and round, with a locking mechanism. You can also find monkey tail and cockspur handles. They are better suited for older windows, and also have a an attractive look. However they can also be used on casement windows.
Vertical Sliding
Vertical sliding windows are the ideal choice for smaller spaces. While horizontal sliding windows are favored for large openings, they are also a good option for larger ones. These types of windows are easy to clean and offer excellent ventilation. They also cost less because they don't require any maintenance. However, they can be susceptible to deterioration if you accidentally drag them with force. It is essential that these windows are installed in a spot where children and pets cannot get to them.
You can open vertical sliding windows by dragging the frame to the left or right. They are typically operated with the spiral balance comprised of a metal strip that extends from the other side of the window and is then twisted into a coil. When the window is lowered, the hidden end of the spiral spins to allow the sash to rise and closed.
Vertical sliding windows are typically constructed from real wood, that gives a classic look to your home. However, if you prefer an elegant design, there are plenty of PVC-U alternatives that come in a wide range of colors and finishes to fit your taste. Some manufacturers also offer woodgrain-like finishes to give a more authentic look.
In contrast to double-hung windows that can be difficult to open in certain conditions, vertical sliding windows are more accessible to those who have mobility issues. They are also less vulnerable to moisture damage than their wooden predecessors, making them an excellent option for homes with young youngsters or older.
Certain homeowners install security features to their new sliding windows to keep guests away from their home. To do this, you can wedge a scrap piece of wood into the lower sash. You can then secure it to the frame to prevent it from being fully opened. If you're looking for an even more sophisticated solution you could consider adding a keyed sliding bolt lock to the frame. This will ensure that your windows are safe, and your family will be able access them easily in the event of an emergency.